We supply flue liners and any accessories to accompany them direct to you at trade prices. If required, we can supply and fit the flue liner in the midlands area (West Midlands, Birmingham, Worcestershire). Fitting price is £175 + VAT.
Items Supplied:
5 Inch (125mm) Multi Fuel Flues and associated Accessories - Click to view
6 Inch (150mm) Multi Fuel Flues and associated Accessories - Click to view
5 Inch (125mm) Gas Flues and associated Accessories - Click to view
Euro-VIT Matt Black Flue Pipe: 125m (5 inch) - Click to view
Euro-VIT Matt Black Flue Pipe: 150m (6 inch) - Click to view
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
£12.50 per meter
Flue Adapter - 125 Rigid to 125 Flex
Connects 125mm (5 inch) Flue Liner to 125mm (5 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
£17.00
Increasing Flue Adapter - 125 Rigid to 150 Flex
Connects 125mm (5 inch) stove pipe to 150mm (6 inch) single wall flue at the bottom of the chimney stack. HETAS recommend that if you are burning wood then you should increase the size of the flue liner by 25mm from the appliances spigot size. This is due to the amount of condensates that can be produced from burning unseasoned wood.
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
£17.00
Terracotta Pot Hanger with Rain Cap and Mesh
The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot.
£43.00
Top Clamp & Top Plate
The Top Clamp & Top Plate are used together with the Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
The plate measures 15 inch square (375mm).
£18.50
Rain Cap
Provides rain protection at the top of the stack.
Terminal slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack.
£20.00
Top Insert Sleeve
The top insert sleeve slides inside the flexible chimney liner at the top of the installation and is used together in conjunction with the Top Plate and Top Clamp, this will support the weight of the liner at the top of the stack.
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
£14.50 per meter
Flue Adapter - 150 Rigid to 150 Flex
Connects 150mm (6 inch) Flue Liner to 150mm (6 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
£17.00
Terracotta Pot Hanger with Rain Cap and Mesh - 6"
The Pot Hanger with integral rain cap and bird guard not only allows the chimney liner to be installed without removing the pot, but prevents any bird penetration and increased rain protection. It is used at the top of the chimney pot to take the weight of the liner, simply push the liner between the three straps and tighten the supplied jubilee band. The pot hanger also has a further three straps which hang down the outside of the chimney pot. The jubilee band supplied is fixed around these to secure against the pot.
£43.00
Top Clamp & Top Plate
The Top Clamp & Top Plate are used together with the Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
The plate measures 15 inch square (375mm).
£23.50
Rain Cap
Provides rain protection at the top of the stack.
Terminal slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack.
£25.00
Top Insert Sleeve
The top insert sleeve slides inside the flexible chimney liner at the top of the installation and is used together in conjunction with the Top Plate and Top Clamp, this will support the weight of the liner at the top of the stack.
A single skin flexible flue liner suitable for relining within a masonry chimney. Suitable for use on appliances fired by gas ( as specified by the fire manufacturer ), and oils up to 28 second, and designed to accommodate temperatures not exceeding 260°C.
The flue liner is manufactured from 316L grade stainless steel and is 0.10mm thick. The flue liner has five convoluteions between each seam. The Flue Liner seam is folded in three planes to give a TRIPLELOCK seal.
£9.50 per meter
Clamp Plate & GC1 Gast Term
A two piece aluminium plate used to support the liner at the top of the stack with GC1 gas term. This type of cowl must be used to terminate a liner installed on gas fired appliances.
Place the terminal over the protruding liner, you can screw a stainless steel screw through the cowl and flue liner to secure. Now apply a suitable acid resistant cement as a seal and weather proof render over the clamp plate and up to the bottom holes of the cowl.
£15.00
Flue Bug Cowl
Provides rain protection at the top of the stack.
Terminal slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£34.00
500mm Fixed Length Pipe - 125mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£15.00
250mm Fixed Length Pipe - 125mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£12.50
Adjustable Length Pipe - 125mm dia
This is a single pipe that slides inside an existing Black Stove Pipe.Therefore MUST be used with another Black Stove Pipe.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£22.50
1000mm Length Pipe with Door - 125mm dia
1000mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£29.00
500mm Length Pipe with Door - 125mm dia
500mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£24.00
330mm Length Pipe with Door - 125mm dia
330mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£23.00
90 TEE - 125mm dia
90 degree Tee - you will need to order the CAP seperately.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£26.00
TEE CAP - 125mm dia
Tee cap is used to cap off the base of a tee. It comes complete with a joint clip and allows access for sweeping purposes.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£17.00
90 Elbow with Door - 125mm dia
90 degree fully swept elbow with access door
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£39.00
Adjustable Wall Bracket - 125mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£39.00
500mm Fixed Length Pipe - 150mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£20.00
250mm Fixed Length Pipe - 150mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£17.50
Adjustable Length Pipe - 150mm dia
This is a single pipe that slides inside an existing Black Stove Pipe.Therefore MUST be used with another Black Stove Pipe.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£27.50
1000mm Length Pipe with Door - 150mm dia
1000mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£34.00
500mm Length Pipe with Door - 150mm dia
500mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£29.00
330mm Length Pipe with Door - 150mm dia
330mm fixed length pipe with access door for sweeping.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£28.00
90 TEE - 150mm dia
90 degree Tee - you will need to order the CAP seperately.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£31.00
TEE CAP - 150mm dia
Tee cap is used to cap off the base of a tee. It comes complete with a joint clip and allows access for sweeping purposes.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£22.00
90 Elbow with Door - 150mm dia
90 degree fully swept elbow with access door
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
£44.00
Adjustable Wall Bracket - 150mm dia
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System. Black stove pipe should NOT be used to pass through ceilings or wall.
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C
To order please call us free on 0800 587 9087. We accept debit and credit card payments and will ship your order to be recieved within 3 - 5 working days.
ALL ORDERS OVER £150 WILL BE SHIPPED FREE OF CHARGE. Orders under £150 will incur a £15 shipping charge.
Stove Fitting and Flue Fitting and Lining Services by Brettell Lane Stoves And Flues Ltd
Suppliers and installers of Cowls, Chimney Pots, Flues, Flue Liners, Stoves, Wood Burning Stoves, Multifuel Stoves, Woodburning Stoves, Stoves of all types in: Solihull, Birmingham, West Midlands, Worcestershire and Wolverhampton.
